[Crease]
Overview
Configure the setting to only crease the covers for Fold & Staple.
NOTICE
- The folded and stapled sheets are output to the Conveyance belt. Set the Delivery tray extension (tray) as preparation, and open the Stopper. Otherwise, the output paper may drop down from the Conveyance belt. Also, the full-load detection function may not work.
- When using thin paper that curls easily for Fold & Staple, output prints so that paper is curled toward the inside. Before outputting a booklet, print out just a few sheets to the Secondary (sub) tray, and check the direction of the curl. If the printed-out sheets are curled upward, the paper is curled inward when a booklet is created.
NOTICE
- The following setting is required to use this function.
- Set [Booklet] of [Application] to [With Cover].
Tips
- This item is displayed on a product equipped with a scanner and HDD. For details, refer to What Is the [COPY]?.
Tips
- When [Spine Corner Forming] is selected, [Crease] is not available. After [Spine Corner Forming] is selected, even if [Crease] is enabled, the crease function is set. Even when [Crease] is enabled first, if [Spine Corner Forming] is selected, it changes to the crease function.
Reference
- For details about [Crease], refer to [Crease].
Specifications
Category | Print Workflow, Copy / Scan | ||
Location | Machine | Touch Panel, Control Panel | |
Printer driver | - | ||
Application | - | ||
Required options | Saddle Stitcher SD-513 with Creaser Unit CR-101 mounted | ||
Required items | - | ||
Setting items | [ON] | Creases. | |
[OFF] | Does not crease. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [COPY] - [Output Setting] - [Fold&Staple] | ||
Control panel - Utility/Counter - [User Setting] - [Initial Setting] - [Copy Initial Setting] - [Output Setting] - [Fold&Staple] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.