[DPWS Extension Settings]
Overview
Configure the setting to print and scan data via the Web service using the discovery proxy server.
In general use, to print data from this system using the Web service, the computer must be connected to the location in which a multicast communication can be established from this system. In this case, to enable printing from this system, install the discovery proxy server in the location in which a unicast communication can be established from this system.
NOTICE
- The following setting is required to display this screen.
- Access in [Admin Mode].
Reference
- For details about how to access in [Admin Mode], refer to [Login].
Specifications
Category | Network / Security | |||
Location | Machine | - | ||
Printer driver | - | |||
Application | Web Connection | |||
Required options | - | |||
Required items | - | |||
Setting items | [Enable Proxy] | [ON] | Uses a proxy server. | |
[OFF] | Does not use a proxy server. | |||
[Proxy1] to [Proxy3] | Select each check box to set a proxy server in the following setting items. The setting method is the same for each proxy server. | |||
[Proxy Server Address] | Set the proxy server address. To enter the host name, select the [Please check to enter host name.] check box. | |||
[File Path] | Set the file path of the proxy server. Up to 255 single-byte characters can be entered. | |||
[Enable SSL] | [ON] | Uses SSL. | ||
[OFF] | Does not use SSL. | |||
[Proxy Server Port Number] | Enter the port number of the proxy server. Range: 1 to 65535 Default: 443 (when SSL is enabled), 80 (when SSL is disabled) | |||
[OK] | Applies the setting. | |||
[Cancel] | Cancels the setting. | |||
Remarks | - | |||
Reference | - | |||
Screen access | Web Connection - [Network] - [DPWS Settings] - [DPWS Extension Settings] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.