Category

Network / Security

Location

Machine

-

Printer driver

-

Application

Web Connection

Required options

-

Required items

-

Setting items

[SNMP Setting]

[ON]

Uses SNMP.

[OFF]

Does not use SNMP.

[SNMP v1/v2c(IP)]

Select this check box to use SNMP v1/v2c.

[SNMP v3(IP)]

Select this check box to use SNMP v3.

[UDP Port Setting]

Sets the UDP port number of SNMP.

Range: 1 to 65535

Default: 161

[SNMP v1/v2c Setting]

[Read Community Name]

Sets the read-only community name.

Up to 15 single-byte characters can be entered.

[Write Community Name]

Sets a writable/readable community name. To enter the name, select the check box.

Up to 15 single-byte characters can be entered.

[SNMP v3 Setting]

[Context Name]

Set context name.

Up to 63 single-byte characters can be entered.

[Discovery User Name]

Set detected username. To enter the name, select the check box.

Up to 32 single-byte characters can be entered.

[Read User Name]

Enter the read-only username.

Up to 32 single-byte characters can be entered.

[Security Level]

[Authentication OFF]

Does not use authentication.

[auth-password]

Authenticates using Authentication password.

[auth-password/priv-password]

Authenticates using Authentication password and Privacy password.

[auth-password]

Sets the read-only Authentication password.

To change the password, select the [Password is changed.] check box.

[priv-password]

Sets the read-only Privacy password.

To change the password, select the [Password is changed.] check box.

[Write User Name]

Enter the user name of the user for whom reading and writing are permitted.

Up to 32 single-byte characters can be entered.

[Security Level]

[Authentication OFF]

Does not perform authentication.

[auth-password]

Authenticates using Authentication password.

[auth-password/priv-password]

Authenticates using Authentication password and Privacy password.

[auth-password]

Sets the read-write Authentication password.

To change the password, select the [Password is changed.] check box.

[priv-password]

Sets the read-write Privacy password.

To change the password, select the [Password is changed.] check box.

[Encryption Algorithm]

[DES]

Sets the encryption algorithm to adopt.

Select this item from the menu list.

[AES-128]

[General Settings]

[MD5]

Sets the authentication algorithm to adopt.

Select this item from the menu list.

[SHA-1]

[TRAP Setting]

[Allow Setting]

[Allow]

Allows a status notification of this system.

[Restrict]

Prohibits a status notification of this system.

[Trap Setting when Authentication Fails]

[Enable]

Sends TRAP if there is an authentication failure.

[Disable]

Does not send TRAP if there is an authentication failure.

[OK]

Applies the setting.

[Cancel]

Cancels the setting.

Remarks

-

Reference

-

Screen access

Web Connection - [Network] - [SNMP Setting]