[Slitting]
Overview
Configure the setting to slit both edges of paper. The slitting amount can also be set.
Tips
- This item is not displayed when the optional Trimmer Unit TU-510 is mounted.
Tips
- Trimming can be set individually for the top and bottom (for paper delivery).
- If [2-Side Slitting] is set to [ON] in [Booklet], the [Offset against Cover] setting becomes valid.
Reference
- For details about both-edge trimming, refer to What Is the [2-Side Slit]?.
Specifications
Category | Print Workflow, Copy / Scan | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | Saddle Stitcher SD-513 with Trimmer Unit TU-503 mounted | ||
Required items | - | ||
Setting items | [(1)] | Set the trimming amount at the top of paper. Range: 8.0 mm to 26.0 mm It is not possible to set the value above 10.0 mm as the trimming amount difference from [(2)]. | |
[(2)] | Sets the trimming amount at the bottom of paper. Range: 8.0 mm to 26.0 mm When the trimming amount is different from [(1)] by 10.0 mm or more, this setting is not available. | ||
[Offset against Cover] | Sets the trimming amount of the body for the cover. Range: -1.0 mm to 1.0 mm (0.1 mm notches) | ||
Keypad | Enter the trimming amount. | ||
[,] / [+] | Increases or decreases the numeric value in steps of 0.1 mm. | ||
[+ / -] | Sets the plus or minus of the numeric value. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [JOB LIST] - [Hold Job] - [Job Ticket] - [Job Ticket Edit] - [2-Side Slitting] | ||
Touch panel - [MACHINE] - [JOB LIST] - [Hold Job] - [Page Edit] - [Job Ticket Edit] - [2-Side Slitting] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.