Network
Q. Where Can I Check the IP Address of This System?
A. You can check the IP address in [Administrator Setting] or [Network/Scan Set.] on the Control panel.
For details about how to check the IP address in [Administrator Setting], refer to [TCP/IP Settings].
For details about how to check the IP address in [Network/Scan Set.], refer to [Report Type].
Tips
- For details about how to set or check the IP address of the Image Controller mounted on this system, refer to [Interface].
Q. Can I Set This System and the Network Using Application?
A. Yes, you can.
Use Web Connection to set the network. For details, refer to [Network].
Q. Can I Establish a Connection by Using AppleTalk?
A. No, you cannot.
Q. What Should I Do to Connect This System to Macintosh Using Bonjour?
A. Check whether TCP/IP is set to this system.
The Bonjour protocol runs on TCP/IP, so you need to pre-set TCP/IP on this system. For details, refer to [TCP/IP Settings].
Q. I Cannot Access Web Connection.
A. Set [Quick IP Filtering] to [No Filtering].
[Quick IP Filtering] is set to [Sync. IP Address] as the default depending on the country or region in which this system is used. Unless it is set to [No Filtering], you cannot access this system from a location of which the network segment is different from this system's installation location.
Reference
- For details about [Quick IP Filtering] settings, refer to [Quick IP Filtering].
in the upper-right of a page, it turns into 
and is registered as a bookmark.