1

Saddle stitcher front door

When clearing a paper jam, open the door and remove the paper.

2

Slit scrap box door

When optional Trimmer Unit TU-503 is mounted, open and process to discard Slit scrap box scrap.

3

Trim scrap tray

Pull out when discarding Trim scrap box scrap.

4

Clamp section upper door

Open to remove paper jammed in folding part, and when cleaning Conveyance belt.

5

Clamp section

Open this section when clearing a paper jam in the fold conveyance section, Fold & staple section, or half-fold section. Before the Clamp section, open the Saddle stitcher front door.

6

Clamp section handle

When opening the Clamp section, grab the lock release lever of the handle to open. When closing the Clamp section, grab the lock release lever of the handle to close.

7

Folding outlet door

When clearing a paper jam in the fold output part, open the door and remove the paper.

8

Delivery tray extension (tray)

Open when ejecting paper to Conveyance belt.

9

Stopper

Prevents paper stacked in Conveyance belt from falling.

10

Secondary (sub) tray

Paper fed from the right side of the system is output without Fold & Staple, Multi Half Fold or Multi Tri-Fold processing. In addition when mounting Trimmer Unit TU-503 and Creaser Unit CR-101, eject also the paper with 2-side slit and creased paper.

11

Paper detection sensor

Detects paper conveyed with Conveyance belt and prevents output paper from falling.

12

Multi tri-fold mode tray

Tri-fold paper is ejected.

13

Conveyance belt

Conveys ejected paper to left side.

14

Conveyance belt

Fold & Staple and Half-fold sheets processed in the system are stacked.

15

Bundle exit tray outlet

Fold & Staple and Half-fold sheets processed in the system are output.

16

Output roller

Output of Fold & Staple and Half-fold sheets processed in the system are put in order.

17

Lever [SD1]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

18

Knob [SD2]

When clearing a paper jam in Creaser Unit CR-101 or a normal paper jam, turn the knob to feed the paper through.

19

Lever [SD3]

When clearing a paper jam or feeding paper jam in the Creaser Unit CR-101, hold the lever, open the guide, and remove the paper.

20

Knob [SD4]

When clearing a paper jam in Creaser Unit CR-101 or a normal paper jam, turn the knob to feed the paper through.

21

Creaser Unit CR-101 (optional)

Creases the paper.

22

Lever [SD5]

When clearing a paper jam or feeding paper jam in the Creaser Unit CR-101, hold the lever, open the guide, and remove the paper.

23

Knob [SD15]

When clearing a paper jam in the Trimmer Unit TU-503 turn the knob clockwise to feed the paper through.

24

Trimmer Unit TU-503 (optional)

Trims both edges of paper.

25

Slit scrap box

Pull out when discarding slit scrap.

26

Scrap box lock release lever

When pulling out Slit scrap box, pull to unlock.

27

Knob [SD16]

When clearing a paper jam in the Trimmer Unit TU-503 turn the knob counterclockwise to feed the paper through.

28

Knob [SD6]

When clearing a paper jam, turn the knob clockwise to feed the paper through.

29

Knob [SD7]

When clearing a paper jam, turn the knob counterclockwise to feed the paper through.

30

Lever [SD8]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

31

Lever [SD9]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

32

Knob [SD10]

When clearing a paper jam, turn the knob clockwise to feed the paper through.

33

Knob [SD11]

When clearing a paper jam, turn the knob counterclockwise to feed the paper through.

34

Knob [SD13]

When clearing a paper jam, turn the knob to feed the paper through.

35

Lever [SD12]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

36

Fold & staple section

Staples the center part of the paper.

37

Stapler

During Fold & Staple processing, 2 or 4 staples are used.

38

Booklet transfer section

Conveys paper (booklet) that underwent fold processing to Clamp section.

39

Knob [SD14]

When clearing a paper jam, turn the knob to feed the paper through.

40

Secondary (sub) tray cover

Open for processing if a paper jam occurs in the tri-fold conveyor unit.

41

Lever [SD17]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

42

Lever [SD18]

When clearing a paper jam, hold the lever, open the guide, and remove the paper.

43

Folding Unit FD-504 (optional)

Spine corner is formed for a booklet with Fold & Staple.

44

Trim scrap box

Stores trim scrap.

Name

Saddle Stitcher SD-513

Format

Saddle-method Saddle stitch system

Paper output method

Secondary (sub) tray output

Ejects to Secondary (sub) tray without processing (when Trimmer Unit TU-503 and Creaser Unit CR-101 are mounted, 2-side slitting and crease processing is performed).

Straight conveyor

Conveys paper to post-processing device without processing (when Trimmer Unit TU-503 and Creaser Unit CR-101 are mounted, 2-side slitting and crease processing is performed).

Fold & Staple

After Fold & Staple processing, it is ejected to Conveyance belt.

Fold & Staple + Trim

After Fold & Staple processing and edge trimming, it is ejected to Conveyance belt.

Multi Half Fold

Half-fold is processed for one or multiple sheets and ejected to Conveyance belt.

Multi Tri-Fold

One sheet, or a bundle is tri-folded and ejected to Multi tri-fold mode tray.

Crease

When Creaser Unit CR-101 is mounted, the creased paper can be processed for Fold & Staple/Half-Fold/Tri-fold. Ejects to Secondary (sub) tray.

2-Side Slitting

When Trimmer Unit TU-503 is mounted, paper for which both edges are cut can be processed for Fold & Staple/Half-Fold/Tri-fold. Ejects to Secondary (sub) tray.

Square pack formation

When Folding Unit FD-504 is mounted, the back of the booklet processed for Fold & Staple can be made flat.

Fold

Fold type

Multi Half Fold, Multi Tri-Fold (when both crease and 2-side slitting is used, multi-fold is released)

Paper Size

Multi Half Fold

Standard: A3 w, B4 w, A4 w, B5 w, Foolscap^*, SRA3 w, SRA4 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 7.25 e 10.5 w, 8K w, 16K w

*: Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, and 8 e 13 w sizes.

Custom:

Widthwise 120 mm to 331 mm, lengthwise 257 mm to 487.7 mm / Widthwise 4.72" to 13.03", lengthwise 10.12" to 19.2"

Wide paper

Multi Tri-Fold

Standard: A4 w, 8.5 e 11 w

Paper weight

Multi Half Fold: 50 g/m² to 300 g/m² / 13 lb Bond to 81 lb Bond

Multi Tri-Fold: 50 g/m² to 91 g/m² / 13 lb Bond to 24 lb Bond

Tri-fold when used together with crease (when Multi Half Fold is released): 106 g/m² to 216 g/m² / 29 lb Bond to 57 lb Bond

Maximum number of multi fold sheets

Multi Half Fold

5 sheets (50 g/m² to 81 g/m² / 13 lb Bond to 22 lb Bond)

3 sheets (82 g/m² to 130 g/m² / 23 lb Bond to 34 lb Bond)

1 sheet (131 g/m² to 300 g/m² / 36 lb Bond to 81 lb Bond)

Multi Tri-Fold

5 sheets (50 g/m² to 81 g/m² / 13 lb Bond to 22 lb Bond)

3 sheets (82 g/m² to 91 g/m² / 23 lb Bond to 24 lb Bond)

Tri-fold when used together with crease

1 sheet (106 g/m² to 216 g/m² / 29 lb Bond to 57 lb Bond)

Load capacity

Multi Half Fold: 30 sets (Includes full detection function)

Multi Tri-Fold:

1 sheet fold: 40 sets

2 sheet fold: 20 sets

3 sheet fold: 13 sets

4 sheet fold: 10 sets

5 sheet fold: 8 sets

(80 g/m² / 21 lb Bond, includes full detection function)

Fold & Staple/Trim

Paper Size

Standard: A3 w, B4 w, A4 w, B5 w, Foolscap^*, SRA3 w, SRA4 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 7.25 e 10.5 w, 8K w, 16K w

*: Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, and 8 e 13 w sizes.

Custom:

Widthwise 120 mm to 331 mm, lengthwise 257 mm to 487.7 mm / Widthwise 4.72" to 13.03", lengthwise 10.12" to 19.2"

Wide paper

Paper weight

50 g/m² to 300 g/m² / 13 lb Bond to 81 lb Bond

Staple position

Variable (54 mm to 185.5 mm / 2.13" to 7.3")

Maximum Fold & Staple sheets

Max. 50 sheets (Plain paper, fine paper: 50 g/m² to 64 g/m² / 13 lb Bond to 17 lb Bond)

Maximum Fold & Staple sheets differ depending on paper thickness. For details, refer to Processed Sheets.

Maximum cutting sheets

Double the maximum Fold & Staple sheets

Load capacity

Conveyance belt

Fold & Staple

2 to 10 sheet stitch: 30 sets or more

11 to 25 sheet stitch: 18 sets or more

26 to 50 sheet stitch: 10 sets or more (includes full detection function)

Fold & Staple + Spine Corner Forming

5 to 10 sheet stitch: 30 sets or more

11 to 25 sheet stitch: 20 sets or more

26 to 50 sheet stitch: 10 sets or more (includes full detection function)

Contact your service representative for more information about the number of sheets for Fine types.

For details about the maximum number of sheets for folding and stapling per booklet, the regulations on the number of sheets for coated paper and color paper, and number of sheets for paper width less than 182 mm / 7.17", refer to Processed Sheets.

Straight output/Secondary (sub) tray output

Paper Size

Standard: A3 w, B4 w, A4 w/v, B5 w/v, A5 w/v, B6 w, Foolscap^*, SRA3 w, SRA4 w/v, A6 w, 13 e 19 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 w/v, 9 e 11 v, 7.25 e 10.5 w/v, 8K w, 16K w/v

*: Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, and 8 e 13 w sizes.

Custom:

Widthwise 95 mm to 331 mm, lengthwise 133 mm to 487.7 mm / Widthwise 3.74" to 13.03", lengthwise 5.24" to 19.2"

Wide paper

Tab paper (only tab edge during output)

Paper weight

Straight output:

40 g/m² to 450 g/m² / 11 lb Bond to 119 lb Bond

Secondary (sub) tray output:

40 g/m² to 350 g/m² / 11 lb Bond to 93 lb Bond

Stack of 49 g/m² / 13 lb Bond or less is not guaranteed. 

* The paper type is limited to 351 g/m² to 400 g/m² / 94 lb Bond to 106 lb Bond.

Load capacity

Stacked height (detects using sensor, when it is full ): 30 mm / 1.18", 200 sheets (80 g/m² / 21 lb Bond), approx.

Z-Fold: 20 sheets (80 g/m² / 21 lb Bond)

Half-Fold: 20 sheets (80 g/m² / 21 lb Bond)

Size

Single unit: 1,241 mm^* (W) e 1,431 mm (D) e 1,020 mm (H) / 48.86"^* (W) e 56.34" (D) e 40.16" (H)

*: Not including 236 mm / 9.29" of the booklet tray part

Back control unit: 1,241 mm (W) e 656 mm (D) e 1,020 mm (H) / 48.86" (W) e 25.83" (D) e 40.16" (H)

Front control unit: 800 mm (W) e 830 mm (D) e 1,020 mm (H) / 31.5" (W) e 32.68" (D) e 40.16" (H)

Mass

337 kg / 742.96 lb

Power

Metric area: AC 230 V (supply from power cord)

Inch area: AC 115 V (supplied from power cord)

DC 24 V, 5 V (supplied from partial front stage)

Power consumption

350 W

52 g/m² to 61 g/m² / 14 lb Bond to 15 lb Bond

Short grain paper

50 (15 to 50)

45 (15 to 45) + 1

40 (14 to 40) + 1

40 (14 to 40) + 1

Long grain paper

30 (15 to 30)

29 (15 to 29) + 1

-

-

62 g/m² to 80 g/m² / 16 lb Bond to 21 lb Bond

Short grain paper

35 (12 to 35)

30 (12 to 30) + 1

25 (11 to 25) + 1

25 (11 to 25) + 1

Long grain paper

30 (12 to 30)

29 (12 to 29) + 1

-

-

81 g/m² to 91 g/m² / 22 lb Bond to 24 lb Bond

Short grain paper

30 (11 to 30)

29 (11 to 29) + 1

24 (10 to 24) + 1

24 (10 to 24) + 1

Long grain paper

-

-

92 g/m² to 135 g/m² / 25 lb Bond to 36 lb Bond

Short grain paper

20 (9 to 20)

19 (9 to 19) + 1

19 (8 to 19) + 1

14 (8 to 14) + 1

Long grain paper

10 (9 to 10)

9 (9 only) + 1

-

-

136 g/m² to 176 g/m² / 37 lb Bond to 47 lb Bond

Short grain paper

15 (7 to 15)

14 (7 to 14) + 1

14 (6 to 14) + 1

9 (6 to 9) + 1

Long grain paper

5 (-)

4 (-) + 1

-

-

177 g/m² to 216 g/m² / 48 lb Bond to 57 lb Bond

Short grain paper

10 (6 to 10)

9 (6 to 9) + 1

9 (5 to 9) + 1

4 (4 only) + 1

Long grain paper

-

-

-

-

217 g/m² to 256 g/m² / 58 lb Bond to 68 lb Bond

Short grain paper

5 (4 to 5)

4 (4 only) + 1

4 (3 to 4) + 1

3 (3 only) + 1

Long grain paper

-

-

-

-

257 g/m² to 300 g/m² / 69 lb Bond to 81 lb Bond

Short grain paper

3 (3 only)

2 (2 only) + 1

2 (2 only) + 1

2 (2 only) + 1

Long grain paper

-

-

-

-

*1: When using long grain paper for the cover paper

Paper type: Long grain Kent paper is not allowed. Other paper is allowed.

When using long grain paper, it may cause creases, wrinkles or image cracks, even in paper other than Kent paper.

*2: The sheet number restrictions in case of 4-point staple are listed in parentheseis.

52 g/m² to 61 g/m² / 14 lb Bond to 15 lb Bond

Short grain paper

30 (15 to 30)

29 (15 to 29) + 1

24 (14 to 24) + 1

24 (14 to 24) + 1

Long grain paper

-

-

62 g/m² to 80 g/m² / 16 lb Bond to 21 lb Bond

Short grain paper

30 (12 to 30)

29 (12 to 29) + 1

24 (11 to 24) + 1

24 (11 to 24) + 1

Long grain paper

-

-

81 g/m² to 91 g/m² / 22 lb Bond to 24 lb Bond

Short grain paper

15 (11 to 15)

14 (11 to 14) + 1

14 (10 to 14) + 1

9 (8 to 9) + 1

Long grain paper

-

-

92 g/m² to 135 g/m² / 25 lb Bond to 36 lb Bond

Short grain paper

10 (9 to 10)

9 (9 only) + 1

9 (8 to 9) + 1

4 (-) + 1

Long grain paper

-

-

136 g/m² to 176 g/m² / 37 lb Bond to 47 lb Bond

Short grain paper

5 (-)

4 (-) + 1

4 (-) + 1

-

Long grain paper

-

-

177 g/m² to 216 g/m² / 48 lb Bond to 57 lb Bond

Short grain paper

-

-

-

-

Long grain paper

-

-

-

-

217 g/m² to 256 g/m² / 58 lb Bond to 68 lb Bond

Short grain paper

-

-

-

-

Long grain paper

-

-

-

-

257 g/m² to 300 g/m² / 69 lb Bond to 81 lb Bond

Short grain paper

-

-

-

-

Long grain paper

-

-

-

-

*1: When using long grain paper for the cover paper

Paper type: Long grain Kent paper is not allowed. Other paper is allowed.

When using long grain paper, it may cause creases, wrinkles or image cracks, even in paper other than Kent paper.

*2: The sheet number restrictions in case of 4-point staple are listed in parentheseis.

52 g/m² to 80 g/m² / 14 lb Bond to 21 lb Bond

16

15 + 1

15 + 1

81 g/m² to 91 g/m² / 22 lb Bond to 24 lb Bond

92 g/m² to 135 g/m² / 25 lb Bond to 36 lb Bond

8

7 + 1

3 + 1

136 g/m² to 176 g/m² / 37 lb Bond to 47 lb Bond

4

3 + 1

*1: When using long grain paper for the cover paper

Paper type: Long grain Kent paper is not allowed. Other paper is allowed.

When using long grain paper, it may cause creases, wrinkles or image cracks, even in paper other than Kent paper.