WebDAV Client Settings

[WebDAV TX Setting]

When using the WebDAV TX function, set this option to ON (default: ON).

[Proxy Settings]

When a proxy server is installed in your environment, register the proxy server.

• [Proxy Server Address]: Enter the proxy server address. Use one of the following formats.
  Example to enter the host name: "host.example.com"
  Example to enter the IP address (IPv4): "192.168.1.1"
  Example to enter the IP address (IPv6): "fe80::220:6bff:fe10:2f16"

• [Proxy Server Port Number]: If necessary, change the proxy server port number (default: [8080]).

• [User Name]: Enter the user name used for proxy authentication (using up to 63 characters).

• [Password]: Enter the password for proxy authentication (using up to 63 characters).

[Chunk Transmission]

When sending data by dividing it into some chunks, set this option to ON (default: OFF).

Configure the setting if your WebDAV server supports chunk transmission.

[Connection Timeout]

If necessary, change the time-out time to limit a communication with the WebDAV server (default: [60] sec.).

[Server Authentication Character Code]

Select a character code to perform the authentication under the WebDAV server (default: [UTF-8]).

You can use this setting when [Japanese] is specified for the language to be displayed on the screen of this machine.

[Certificate Verification Level Settings]

To validate the certificate during SSL communication, select items to be verified.

• [Expiration Date]: Confirm whether the certificate is within the validity period (default: ON).

• [CN]: Confirm whether CN (Common Name) of the certificate matches the server address (default: OFF).

• [Key Usage]: Confirm whether the certificate is used according to the intended purpose approved by the certificate issuer (default: OFF).

• [Chain]: Confirm whether there is a problem in the certificate chain (certificate path) (default: OFF). The chain is validated by referencing the external certificates managed on this machine.

• [Expiration Date Confirmation]: Confirm whether the certificate has expired (default: OFF). The expiration date confirmation is performed in the order of OCSP (Online Certificate Status Protocol) service, and CRL (Certificate Revocation List).

[HTTP Version Setting]

Select the version of the protocol for HTTP communication (default: [HTTP/1.1]).

• [HTTP/1.1]: Uses HTTP/1.1 only.

• [HTTP/2, HTTP/1.1]: Uses HTTP/2 when connected to HTTP/2. In other cases, HTTP/1.1 is used.